Área privada
X

Storage

Actiu Planner

Metal Pedestals

ACCESSIBILITY

Comfortable and opened. We design furniture to solve all needs at any moment and perfectly integrated in any nowadays working spaces: more agile and comfortable, efficient and multipurpose. These modules split working spaces providing confidentiality and privacy. An easy filing and storing solution for daily accessibility.

STRONG

Actiu Mobile pedestals are polyvalent modules to optimize and get an easier personal and daily filing. A practical filing system.

ECOLOGY

ENERGY SAVING
The new technological production system included, reduce the energy resources used to manufacture each component. Materials are very well used to avoid wastes.

RECYCLED AND RECYCABLE MATERIALS
ACTIU environmental policy opts to use recycled materials in those components where functionality and lasting is not a condition. Materials used in Metal storages such as Aluminium, Steel and Wood sare totally recyclable.

GENERALES FEATURES

STRUCTURAL
FEATURES		 GENERALES FEATURES FOR METAL STORAGES
Material Steel sheet 0,8 mm thickness.
Structure One structure only without joints
Drawer Totally accessible. Steel sheet 0,8 mm thikness
Filing Drawer Steel sheet bottom drawer 0,8 mm thikness
Locking system. Security Integrated anti-tilt system. System to avoid opening more than two drawers at the same time
Interchangeble locking Security locker. Open-close position. Unique key available
Castors Anti-skid castors with locker in front castors ( Ø=65 mm). Only available in mobile pedestals
5th castor for filing drawer Better stability and functionality. Available in Mobile pedestals only. Fixed pedestals not necessary
Soundproofing and soft movements Polyamide locking bar. Silent movements. Rubber runner-stop
Runners models Runners totally extracted
Runners Steel telescopic balls bearing slides.Maximum length. Pre-galvanized, layer passivization, electrolitic to salt resistance
COMPLEMENTARY
FEATURES		 GENERALES FEATURES FOR METAL STORAGES
Handles Ergonomy. Several options: metallic or thermoplastic, standard or fitted inside the surface
Book stands for shelves Optional. Metal sheet.
Pencil tray Optional. High resistance thermoplastic material
Tops Materials and thickness depending on the complements. (16mm thickness MFC tops for Mobile pedestals) MFC de 16, 19, 25 o 30 mm, HPL 25 mm or C.Laminate 13 mm thikness
Front drawers Frontal de acero de 0,8 mm de espesor o frontal de aglomerado de particulas de madera de 16 mm de espesor encolado con resinas sintéticas de densidad media = 660-635 Kg/m3 y canto de PVC de espesor = 2mm
LAYERS
FEATURES		 GENERALES FEATURES FOR METAL STORAGES
Coating Electrostatic coat epoxi-polyester - bonding 2nd generation polymerized 200 ºC. Degreasing treatment and nanoceramic application anticorrosion (improvements about 300% in resistance and adherence). No-fingersprint effect.
Coating thikness (UNE EN ISO 2808:00) Coating thickness = 90µm
Adherence in a cross cut (EN ISO 2409:96) Surfaces not affected. Not loosings. 5 grades valuation
Surface finish silk texture. Matt finish
Layer hardness (PERSOZ) (UNE EN ISO 1522:07) D > 220, not penetration in the substrate
Impact resistance (UNE EN ISO 6272) R (12,5 mm) = 50; Not cracks, not remove from the support
Anti-corrosive resistance. Salt spray fog
(EN ISO 7253)		 Essay resistance (R) 500 hours = R = 750 hours
Thermical resistance. Warm-cold cycles
(UNE 48025)		 Not apparent variation. 5 grades valuation.
Humidity resistance (UNE EN ISO 9227:07) Achieved. Not bright losing or bubles
Light resistance (UNE EN ISO 11341) Excelent. No cracks neither bubbles. Protected properties remain the same
Resistance to chemical products for domestic use without thinner (UNE 48027:80) Grade 5. Good resistance to acids, alcalys and oils in room temperature.
Stain resistance (UNE 48027:80) Not visible fault
Maintenance Easy to maintenance and clean. Recommended to use PH neutral products
Anti-bacterium layer Optional protection for Health, children education, food laboratories requirements.

Download catalog